Freefly CCW Single-Motor Propeller Set with ActiveBlade (M4 Fasteners)

Description

Freefly CCW Single Motor Propeller Set with ActiveBlade (M4 Fasteners) is a balanced counterclockwise replacement for one Alta X motor. The kit includes a pre-balanced prop pair, the ActiveBlade hub for M4-fastener motors, and replacement hardware for a clean swap on boom 1 or boom 3.

ActiveBlade counters dissymmetry of lift and cyclic loading during aggressive flight, improving smoothness and component longevity. In Freefly testing, ActiveBlade reduced peak vibration to roughly one-fifth of typical levels, supporting steadier imaging and more consistent handling.

Why ActiveBlade

• Smoother flights: lower peak vibration benefits payload data quality and airframe health.
• Balanced from the box: prop set ships pre-balanced to reduce maintenance time.
• Single-station service: replace one CCW position without disturbing the full prop set.

Fitment & Interchangeability

• CCW direction: for counterclockwise motors on boom 1 or boom 3.
• M4 hub pattern: designed for Alta X motors that use M4 fasteners at the prop hub.
• Motor markings matter: if your motor is marked “M12” on top, use the CCW ActiveBlade set for the M12 variant.
• Mixable blades: black props and orange-tipped props are interchangeable across the aircraft.

Install Notes

• Follow the Alta X Flight Manual, Maintenance section, for removal and installation steps.
• Use a medium-strength threadlocker such as Loctite 243 on fasteners (not included).
• Perform a short hover check after installation and verify smooth operation before mission flights.

In the Box

(1) CCW prop set with ActiveBlade (counterclockwise, single-motor kit)
(4) M4 × 8 SHCS fasteners (≈0.31″ length) for mounting ActiveBlade to motor
(2) ActiveBlade bumpers, 10 mm (≈0.39″), gray

*Threadlocker not included (use Loctite 243 or equivalent).

Compatibility

Fitment

Freefly Alta X motors with CCW rotation on boom 1 or boom 3 that use M4 fasteners at the prop hub.

Motor Identification

If your motor uses M3 fasteners and is marked “M12” on top, use the ActiveBlade replacement for M12 motors (CCW variant).

Interchangeability

Orange-tipped and all-black Alta X props are interchangeable and may be mixed on a single aircraft.

Explore more from our collection.